Abstract
Generally, brick buildings are in the open-air environment year round, and damage to them is aggravated by the effect of repeated freezing and thawing cycles. In order to determine freeze-thaw damage and deterioration mechanism, the initial moisture content of gray brick specimens was set as 20%, 40%, 60%, 80%, 100%. The effects of moisture content and the number of freeze-thaw cycles on the quality, mechanical properties and microstructure of gray brick were investigated by uniaxial compression tests and scanning electron microscopy (SEM) tests. Numerical simulations were applied to model the freezing and thawing process. The results showed that: as the number of freeze-thaw cycles increased, the mass loss rate and peak strength reduction rate of gray brick both increased. The initial moisture content had a greater impact on damage to gray brick due to freeze-thaw; ω = 80% was defined as the limit moisture content of gray brick. Under the repeated action of freeze-thaw cycles, the areas affected by thermal stress were mainly concentrated in the center of the outer surface and the center of the side of gray bricks. The maximum thermal stress after 55 freeze-thaw cycles was 1.522 × 10(-2) MPa. This research results provide a theoretical basis for the prevention and protection of frost damage of brick buildings in a freeze-thaw environment.