Abstract
Dental mold gypsum materials require fine powder, appropriate liquidity, fast curing, and easy-to-perform clinical operations. They require low linear expansion coefficient and high strength, reflecting the master model and facilitating demolding. In this article, the suitable accelerators and reinforcing agents were selected as additives to modify dental gypsum. The main experimental methods used were to compare the trends of linear expansion coefficients of several commercially available dental gypsum products over 72 h and to observe the cross-sectional microstructure of cured bodies before and after dental gypsum modification using scanning electron microscopy. By adjusting the application of additives, the linear expansion coefficient of dental gypsum decreased from 0.26% to 0.06%, while the flexural strength increased from 6.7 MPa to 7.4 MPa at 2 h. Formulated samples showed good stability and gelation properties with linear expansion completed within 12 h. It is indicated that the performance of dental gypsum materials can be improved by adding additives and nanomaterials, which provided a good reference for clinical preparation of high-precision dental prosthesis.