Abstract
Background: With the tremendous increase in the usage of smart meters for industrial/ household purposes, their implementation is considered a crucial challenge in the Internet of Things (IoT) world, leading to a demand for emerging 5G technology. In addition, a large amount of data has to be communicated by smart meters efficiently, which needs a significant enhancement in bandwidth. The power amplifier (PA) plays a major role in deciding the efficiency and bandwidth of the entire communication system. Among the various modes of PAs, a newly developed Class-J mode PA has been proven to achieve high efficiency over a wide bandwidth by maintaining linearity. Methods: This paper proposes a Class-J mode PA design methodology using a CGH40010F-GaN device that operates at a 3.5 GHz frequency to meet the requirements of 5G wireless communication technology for the replacement of existing 4G/LTE technology used for advanced metering infrastructure (AMI) in smart grids. This research's main objective is to design the proper matching networks (M.Ns) to achieve Class-J mode operation that satisfies the bandwidth requirements of 5G smart grid applications. With the target impedances obtained using the load-pull simulation, lumped element matching networks are analyzed and designed in 3 ways using the ADS EDA tool. Results: The simulation results reveal that the proposed Class-J PA provides a maximum drain efficiency (D.E) of 82%, power added efficiency (PAE) of 67% with 13 dB small-signal gain at 3.5 GHz, and output power of 40 dBm (41.4 dBm peak) with a power gain of approximately 7 dB over a bandwidth of approximately 400 MHz with a 28 V power supply into a 50 Ω load. Conclusion: The efficiency and bandwidth of the proposed Class-J PA can be enhanced further by fine-tuning the matching network design to make it more suitable for 5G smart meter/grid applications.