Abstract
Additive manufacturing is becoming a global phenomenon due to its versatile properties and numerous benefits, which is not possible by conventional machining processes. Fused deposition modeling (FDM) shows a huge potential of shift from rapid prototyping toward the rapid manufacturing. Nowadays, the strength of the FDM-printed parts is very important to consider along with all the printing parameters, which affect the strength of these parts. This study includes the investigation of printing parameters (infill density, layer thickness, and shell count) on the strength of FDM-printed parts of acrylonitrile butadiene styrene (ABS) and carbon fiber-reinforced ABS (ABS-CF). These printing parameters directly affect the quality as well as the strength of the 3D-printed parts through FDM. Tensile tests were performed on the universal testing machine on both types of printed parts. The optimized parameters for the 3D-printed samples of the pristine ABS are found to be 0.1045 mm of layer thickness, 57.72% of infill density, and 7.63 numbers of shell count, while the optimum parameters obtained for ABS-CF are 0.2780 mm of layer thickness, 28.37% of infill density, and 9.88 numbers of shell count. The results show that the layer thickness and shell count have a significant effect on the ultimate tensile strength of the 3D-printed parts.