Abstract
Research and development of ramie harvesting equipment is a key link to revitalize ramie industry, problems such as the tendency of stalks to tangle and clog the machine are very problematic, seriously affect the quality and fluency of the harvester. The structure of ramie stalk is complex, and the mechanical properties of each component vary greatly, collision between stalk and machine creates complex stress relationship. By building a finite element model, it is possible to analyze the stress state of the stalk during bending from a microscopic perspective, and to analyze the complex stress-strain situation within the stalk. The purpose of this paper is to establish a standard ramie stalk bending finite element model to provide a theoretical basis for the subsequent kinematics and dynamics. Firstly, material experiments were carried out on ramie straw. The structural and mechanical parameters of the straw components were obtained through measurement and calculation tests, and the force-deformation curves for straw bending were obtained. Bending finite element simulations were carried out on the basis of mechanical tests, and the parameters such as dynamic friction coefficient, wood Poisson's ratio and bast Poisson's ratio were determined by the central combination design. Then established an accurate bending finite element simulation model of ramie stalk, the accuracy of the model was verified at the end. In this paper, the key parameters of the ramie stalk model were calibrated through a combination of material tests and simulations. All parameters of the ramie stalk model were finally obtained, and the bending mechanical properties of the ramie stalk were analysed by applying finite element analysis. This bending mechanics simulation model can be used for kinematic and dynamics simulation analysis of conveying and baling to provide a theoretical basis for the structural design of the harvester. The methods explored here can be applied to other slender straw crops.