Graphene-MoS(2) with TiO(2)-SiO(2) layers based surface plasmon resonance biosensor: Numerical development for formalin detection

基于石墨烯-MoS₂和TiO₂-SiO₂层的表面等离子体共振生物传感器:用于甲醛检测的数值模拟

阅读:1

Abstract

In this article, numerically a surface plasmon resonance (SPR) biosensor is developed based on Graphene-M (O) S (2) with TiO (2) -SiO (2) hybrid structure for the detection of formalin. Based on attenuated total reflection (ATR) method, we used angular interrogation technique to sense the presence the formalin by observing the change of "minimum reflectance with respect to SPR angle" and "maximum transmittance with respect to surface plasmon resonance frequency (SPRF)". Here, we used Chitosan as probe analyte to perform chemical reaction with formalin (formaldehyde) which is consider as target analyte. Simulation results show a negligible variation of SPRF and SPR angle for improper sensing of formalin that confirms absence of formalin whereas for proper sensing is considerably countable that confirms the presence of formalin. Thereafter, a comparison of sensitivity for different sensor structure is made. It is observed that the sensitivity without TiO(2), SiO(2), MoS(2) and Graphene (conventional structure) is very poor and 73.67% whereas the sensitivity with graphene but without TiO(2), SiO(2) and MoS(2) layers is 74.67% consistently better than the conventional structure. This is due to the electron loss of graphene, which is accompanying with the imaginary dielectric constant. Furthermore, the sensitivity without TiO(2), SiO(2) and graphene but with MoS(2) layer is 79.167%. After more if both graphene and MoS2 are used and TiO(2) and SiO(2) layers are not used then sensitivity improves to 80.5%. This greater than before performance is due to the absorption ability and optical characteristics of graphene biomolecules and high fluorescence quenching ability of MoS(2). Further again, if TiO(2)-SiO(2) composite layer is used with the Graphene-MoS2 then the sensitivity enhances from 80.5% to 82.5%. Finally, the sensitivity for the proposed structure has been carried out, and result is 82.83%, the highest value among all the previous structures to integrate the advantages of graphene, MoS(2), TiO(2) and SiO(2).

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。