[Influence of surface roughness on oral streptococcal adhesion forces to dental filling materials]

[表面粗糙度对口腔链球菌粘附于牙科填充材料的影响]

阅读:1

Abstract

OBJECTIVE: This study is to determine the common oral streptococcal adhesion forces by using composite resin and glass ionomer cement (GIC) with different degrees of surface roughness via atomic force microscopy (AFM) analysis. The influence of surface roughness on bacterial adhesion force is also discussed. METHODS: Polishing and grinding were applied to obtain 300, 200, 100, and 10 nm surfaces of light-cured composite resin and GIC samples. Surface topography was assessed by AFM analysis. Initial colonizers (Streptococcus sanguinis and Streptococcus mitis) and cariogenic bacterial strains (Streptococcus mutans and Streptococcus sobrinus) were used to obtain bacteria-modified AFM probes. The force-distance curves were also measured by AFM analysis to determine the adhesion forces of bacteria on the surfaces of the composite resin and GIC. Material surface roughness was analyzed using ANOVA, and adhesion forces were subjected to nonparametric analysis (Kruskal-Wallis test). Comparison among groups was performed by Dunn's test. Material surface roughness and bacterial adhesion forces were subjected to correlation analysis. RESULTS: Bacterial adhesion forces increased with increasing material roughness. The adhesion forces of the four bacterial species reached the maximum on the material surface of 300 nm. The adhesion force of Streptococcus mutans increased from 0.578 nN to 2.876 nN on GIC surfaces with 10 and 300 nm roughness. The adhesion forces of the four species on the surface of the composite resin were stronger than that of GIC. The initial colonizers exhibited stronger adhesion forces to different materials than the cariogenic strains. Intergroup differences were evident on the 200 and 300 nm material surfaces. CONCLUSIONS: The surface roughness of the material significantly affected the bacterial adhesion forces, and a significant linear correlation existed between both factors. The bacterial adhesion forces of the GIC were lower than that of the composite resin. Furthermore, surface roughness exhibited less influence on the cariogenic strains than that on the initial colonizers.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。