Abstract
The use of calcium (Ca) metal anodes in batteries is currently challenged by the development of a suitable solid electrolyte interface (SEI) that enables effective Ca(2+) ion transport. Native calcium electrolytes produce a passivation layer on the surface of the calcium electrodes during cycling, causing a decrease in capacity during cycling and the need for large overpotentials. The use of a hybrid SEI is a strategy to mitigate the uncontrolled production of a passivation layer and reduce the overpotentials needed for the plating and stripping of calcium. Here, we report the development of a hybrid potassium (K)/Ca SEI layer investigated in symmetric Ca//Ca cell configurations. Using KPF(6) salt in a ternary mixture of carbonate solvent (EC/EMC/DMC), Ca//Ca cells can be cycled up to 200 h at a capacity of 0.15 mAh/cm(2) with a current density of 0.025 mA/cm(2). The symmetrical cells consistently cycle at overpotentials of 1.8 V. Ex-situ X-ray diffraction (XRD) of cycled electrodes reveals plating and stripping of both calcium and potassium. Energy dispersive X-ray (EDX) maps confirm the plating of calcium and potassium during galvanostatic cycling. Scanning electron microscopy (SEM) cross-sectional views of the calcium electrodes reveal a continuous SEI layer formed over the calcium metal. XRD analysis reveals the SEI layer consists of K-based inorganics along with the identification of permanent and transient phases. FTIR outlines the parallel plating of both calcium and potassium at both regions of redox activity. Raman spectroscopy of the electrolyte reveals compositional changes over the course of cycling that promote increased plating and stripping. The results indicate that potassium electrolytes are a possible route for tuning the SEI to enable reversible calcium electrochemical cycling.