Abstract
Highly hygroscopic pharmaceutical and nutraceutical solids are prone to significant changes in their physicochemical properties due to chemical degradation and/or solid-state transition, resulting in adverse effects on their therapeutic performances and shelf life. Moisture absorption also leads to excessive wetting of the solids, causing their difficult handling during manufacturing. In this review, four formulation strategies that have been employed to tackle hygroscopicity issues in oral solid dosage forms of pharmaceuticals/nutraceuticals were discussed. The four strategies are (1) film coating, (2) encapsulation by spray drying or coacervation, (3) co-processing with excipients, and (4) crystal engineering by co-crystallization. Film coating and encapsulation work by acting as barriers between the hygroscopic active ingredients in the core and the environment, whereas co-processing with excipients works mainly by adding excipients that deflect moisture away from the active ingredients. Co-crystallization works by altering the crystal packing arrangements by introducing stabilizing co-formers. For hygroscopic pharmaceuticals, coating and co-crystallization are the most commonly employed strategies, whereas coating and encapsulation are popular for hygroscopic nutraceuticals (e.g., medicinal herbs, protein hydrolysates). Encapsulation is rarely applied on hygroscopic pharmaceuticals, just as co-crystallization is rarely used for hygroscopic nutraceuticals. Therefore, there is potential for improved hygroscopicity reduction by exploring beyond the traditionally used strategy.