Abstract
The paper presents the manufacturing technology for a material obtained from glass fiber waste, quartz sand, and polyester binder, used for ornamental building plates. The composite has a cover surface that ensures protection of the material from environment attacks and a structural material that can be subjected to chemical degradation. The mechanical properties of the obtained material were experimentally investigated through compressive mechanical tests. To observe the material's behavior in contact with external agents (rain or acid rain, due to environmental pollution), analyses were performed in laboratory conditions. An investigation on the effects of chemical attack substances was conducted. SEM and macroscopic analyses were performed, and the surface roughness was determined for each sample area. The obtained results were statistically analyzed and showed that there is no significant difference between the surface roughness for treated and untreated samples. Furthermore, the surfaces were analyzed by X-ray diffraction and mineralogical optical microscopy in polarized light with crossed nicols. It was observed that rainwater does not affect the plate structure even if the plates are used in high-pollution environments. The material is suitable for exterior building walls from the point of view of chemical attack and resistance.