Abstract
INTRODUCTION: This study aimed to assess the fracture strength of endodontically treated mandibular molars with traditional endodontic access cavity (TEC) and truss endodontic access cavity (TREC) designs that were restored with composite resin and underwent thermocycling. METHODS: Sixty mandibular first and second molars were randomly divided into 6 groups (n=10) of intact controls without thermocycling (group 1), intact controls with thermocycling (group 2), TEC without thermocycling (group 3), TEC with thermocycling (TEC-TC, group 4), TREC without thermocycling (group 5) and TREC with thermocycling (TREC-TC, group 6). The root canals were then instrumented to #25,7% using nickel-titanium files and were filled with gutta-percha and AH26 sealer with lateral compaction technique. Access cavity was restored with Gradia composite. All teeth were then thermocycled for 480 cycles between 5°C and 55°C for 30 seconds and their fracture strength was measured in a universal testing machine with a round-end piston with 6 mm diameter at a speed of 1 mm/min. Data were analyzed using two-way and one-way ANOVA. RESULTS: Without thermocycling, the fracture strength of endodontically treated teeth with TREC designs had no significant difference with the control group (P>0.05). However, both TEC and TREC designs significantly decreased the fracture strength of endodontically treated teeth after thermocycling (P<0.05), such that minimum fracture strength was noted in TEC-TC group. CONCLUSION: Under the conditions of this ex vivo study, TREC enhances the fracture strength of endodontically treated teeth under thermal stresses.