Abstract
Workpiece will face corrosive problems during its application after the manufacturing process. As the common final process, grinding can generate special metamorphic layer on the surface of workpiece and change the initial corrosion resistance of workpiece. In order to study the corrosion resistance of workpiece after grinding process, the paper carries on combining experiment of grinding and electrochemical corrosion. The characteristic of corrosion resistance of grinding is revealed based on the association of grinding mechanism and electrochemical theory. The corrosion potential of workpiece after grinding is higher than matrix, which shows the grinding surface is difficult to begin to corrode. Electrochemical impedance spectroscopy (EIS) shows the grinding surface has large phase angle, impedance and capacitance characteristic because the metamorphic layer of grinding has good obstructive ability. They reveal that grinding improves the surface corrosion resistance of workpiece. Then the mechanism of the corrosion resistance of grinding is revealed. The special grain boundary formed in grinding with much C element, large clusters and complex shape prolongs the corrosion channel, which reduces the corrosive speed. While, the sensitive hardening structure generated in grinding hardening with much free energy is easy to form the corrosion cell, which will accelerate the corrosion.