Abstract
Addressing the issue of porosity evolution during the curing process of thermosetting epoxy resin-based composites, a simulation model has been developed to describe the flow-compaction behavior of the composites aiming to predict changes in porosity throughout the curing process. Initially, a multi-physics coupling model encompassing sub-models for thermo-chemical, fiber bed compression, void compression, and percolation flow was established. This model accurately describes the changes in porosity within the composites during the flow-compaction process. The UMAT subroutine of the ABAQUS finite element analysis software was utilized to integrate these sub-models into the software. The validity of the simulation model was verified through corresponding experimental porosity measurements. The research further indicates that the porosity at the fillet of L-shaped composite components is higher than that in flat areas due to insufficient shear slip capacity. The results show that the porosity of the rounded corners of the L-shaped composite members is higher than that of the flat plate region due to the lack of shear slip capacity, and the fiber bed stiffness and inter-ply friction coefficient play an important role in the change in porosity.