Abstract
Outdated-waste-carbon-fiber-reinforced olefin composites (oCFOCs) were fabricated with easily disposable polyolefin resins, polypropylene (PP), high-density polyethylene (HDPE), and low-density polyethylene (LDPE), by compressive molding using a hot press. The flexural and impact strengths of the oCFOCs from each respective resin type and oCF content, ranging from 35 to 70 wt.%, were increased by the aging treatment (120 °C and 95% humidity under a pressure of 0.8 MPa) until an aging time of three days, due to improved resin impregnation. For the oCFOC with PP, the hydrogen bond between PP and developed C-O groups due to the aging treatment and the existing silane layer of oCF is considered to assist cohesion between the resin and oCF. In particular, PP and 45 wt.% oCF content were the most effective conditions for improving the oCFOCs' mechanical properties, in addition to endowing the oCFOCs with good moldability and dimensional stability. Our results demonstrate that durable recycled composites can be manufactured using oCF and PP.