Abstract
Polymer modified bituminous thick coatings are increasingly used in the construction industry to protect underground parts of buildings from groundwater. When assessing their durability, one vital issue related to their functional properties is the influence of water absorption on the waterproofness of the applied solution as a result of the action of groundwater with different pH values. As part of the research, the water absorption of the products in question was assessed using the method of total immersion in water with pH of 4.0, 7.0 and 7.5 as well as comparatively, as a result of one-way exposure to demineralized water under successively increasing pressure up to 0.5 MPa. The moisture susceptibility of the coatings was assessed both concerning the local surface damage and the continuous waterproofing coating. It was established that the coatings show the highest water absorption when the water pH is 4.0, which simulates the groundwater aggressiveness on construction products. It was proven that moisture absorbed by the coatings is retained within this layer and is not transferred to the substrate on which the coatings are laid. It was also found that water in contact with the tested coatings changes its reaction to alkaline, which can result in contamination of groundwater in the area of waterproofing coating. A modification of the method of assessing the water absorption of polymer modified bituminous thick coatings was proposed, taking into account their use in conditions of use.