Abstract
Ultra-high-performance concrete (UHPC) has gained widespread application across various domains owing to its superior properties. Nevertheless, the high cement content and associated costs present challenges, including significant shrinkage of the cement matrix and economic considerations. Using industrial by-products or waste to replace some raw materials is one of the effective solutions. Meanwhile, China's ceramic industry generates a large amount of waste every year. Applying ceramics in UHPC can effectively solve these problems. This study explores the use of recycled tile waste as a sustainable alternative to reduce the use of natural aggregates and cement and enhance the performance of UHPC. To investigate the impact of recycled ceramics on the mechanical properties of UHPC, three preparation methods were employed: (1) single incorporation of ceramic tile aggregate (CTA) to replace fine aggregates (0-100%), (2) single incorporation of ceramic tile powder (CTP) to replace cementitious materials (0-20%), and (3) dual incorporation of both CTA and CTP. The effects of different preparation methods and substitution rates on mechanical properties were evaluated through compressive and flexural strength tests, and microstructure analyses were conducted by scanning electron microscopy (SEM) and mercury intrusion porosimetry (MIP). The test results show that the compressive strength and flexural strength of UHPC increased with an increase in the ceramic particle substitution rate and reached the maximum value at a 100% substitution rate. On the contrary, ceramic powder substitution initially reduced the compressive strength, and it slightly recovered at a substitution rate of 10%. However, the bending strength decreased with an increase in the substitution rate of the ceramic powder. When ceramic particles and ceramic powder were used in combination, the compressive strength was the highest when 100% ceramic particles and 20% ceramic powder were used as substitutes. The maximum flexural strength occurred when 100% ceramic particles or 5% ceramic powder was used as a substitute. This study demonstrates that recycled ceramic waste can effectively enhance the mechanical properties of UHPC, providing a sustainable solution for reducing cement consumption and improving the performance of concrete.