Abstract
During the cold metal transfer (CMT) arc additive manufacturing process of steel/copper bimetallic materials, interfacial penetration cracks have been observed due to the significant differences in thermal and physical properties between steel and copper. To mitigate the occurrence of these penetration cracks and enhance the interfacial elemental diffusion at the steel/copper junction, this study aims to fabricate high-performance steel/copper bimetallic materials with a uniform microstructure using CMT arc additive manufacturing techniques. A reciprocating additive sequence was adopted, with steel deposited first, followed by copper. Four different interlayer compositions, Cu-Ni, Fe-Ni, Cu-Cr, and Ni-Cr, were applied to the steel surface before the deposition of aluminum bronze. These interlayers served as a transition between the steel and copper materials. The manufacturing process then continued with the deposition of aluminum bronze to achieve the desired bimetallic structure. After the addition of interlayers, all four sets of samples exhibited excellent macroscopic formability, with clear and smooth interlayer contours and no visible cracks or collapse defects at the junction interfaces. The mechanical properties of the composite walls were enhanced following the addition of the interlayers, with an increase in tensile strength observed across the samples. The sample with the Fe-Ni interlayer showed the most significant improvement, with a 52% increase in impact energy absorption. Furthermore, the sample with the Fe-Ni interlayer demonstrated a higher average hardness level than the other groups, which was associated with the distribution and content of the iron-rich phase and the β' phase.