Abstract
This study comprises the influence of particle sizes of discarded tire rubber with and without pre-treatment to check the hardened properties of rubberized concrete (RC) in analogy to control concrete. Fine aggregates from concrete are volumetrically substituted using untreated and pre-treated rubber particles of three different sizes up to 20% in part, with an increment of 5%. Pre-treatment using two different pre-treatment methods i.e., sodium hydroxide (NaOH) and silica fume and NaOH was adopted. Properties of fresh concrete-i.e., density, workability, and toughened concrete strengths as compressive, flexural, and indirect tensile strengths were assessed with the control concrete. Along with these, unconventional properties like cylindrical compressive strength and abrasion, resistance to impact, and water absorption are compared. The mechanical properties of RC were found to be similar to conventional concrete, as the compressive strength for RC with pretreated rubber fibers up to 10% obtained was 61.5 MPa while flexural and split tensile strength was above 5.6 MPa. The abrasion resistance was obtained for RC with rubber fibers from 0.98 to 1.46 mm up to 20% substitution against 1.34 mm of control concrete. Modified concrete with pre-treated rubber particles showed better performance than concrete with untreated rubber particles with coarser sizes.