Abstract
This work presents a system developed to determine changes in the impedance of an eddy current probe placed above a conductive disc containing two layers of different diameters. In the first step, an analytical model was derived with an employment of the truncated region eigenfunction expansion (TREE) method. The final formula for the probe impedance change was presented in a closed form, which makes it possible to implement it in any programming language or computer algebra system. The mathematical model was implemented in MATLAB and used to design probes and to determine the optimal test parameters. In the next step, two eddy current probes with a single coil with different geometric dimensions were constructed. Impedance measurements were carried out using an LCR meter for three sets of double-layer discs. The tested discs were made of materials with different electrical conductivities. The upper and lower layers of the disc also differed in terms of the geometric dimensions, i.e., the diameter and thickness. The tests were performed for the operating frequency of the probe ranging from 1 kHz to 10 kHz. In all cases, a very good agreement was obtained between the measurement and the calculation results. Both the error in the changes in resistance and the error in the changes in reactance did not exceed 3.5%.