Abstract
Crystalline silica was categorized by the International Agency for Research on Cancer as a known human carcinogen. Activities related to the processing of ceramic tiles, releasing crystalline silica, may vary considerably in terms of hours worked per day and days worked per week. This variability could be particularly high for craftsmen who process ceramic materials directly on-site during installation. The aim of this study is to measure the likely exposure to respirable crystalline silica (RCS) during ceramic tiles installation, evaluating the exposure to RCS of workers processing these tiles. Exposure assessments to RCS were conducted via both fixed-site and personal sampling for 2 working hours. The measured concentrations were calculated as 8-h time-weighted average (TWA) exposures, assuming no further RCS exposure in the time period. The permitted exposure time, not to exceed the occupational exposure limit (OEL) value, was then calculated also considering the assigned protection factor of selected respiratory protective equipment. The results of this study, considered as a worst-case simulation, show that, during the processing of ceramic tiles releasing RCS, the worker exposure can be very high (up to 240.9 µg/m3), exceedance of several OELs, including the European OEL of 100 µg/m³. Even working for a few hours a day, the RCS 8-h TWA OEL is likely to be exceeded. Inhaled exposure concentrations can be reduced by using appropriate respiratory protection, by a factor equal to 10 or 20. The assumption of this work was that (i) the cutting/grinding times are not always necessarily equal to 2 h and that (ii) these processes are not characterized by pre-established and continuous processing times. For these reasons, it is important to carefully evaluate the duration of exposure to RCS during the various tasks/activities performed, as these may vary depending on different factors.