Abstract
The produced water from the No. 1 Oil Production Plant of Xinjiang Oilfield is rich in divalent ions, including Ca(2+), Mg(2+), and SO(4)(2-), leading to extremely high scaling tendency that fails to meet the reinjection standard. Therefore, highly efficient water softening technology is urgently required for such wastewater treatment. In this study, a novel negatively charged nanofiltration (NF) membrane was fabricated via interfacial polymerization using 2-carboxypiperazine and trimesoyl chloride as monomers. The membrane was systematically characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR), and its rejection performance was investigated under various conditions. Results show that the maximum rejection rates of the NF membrane reached 99% for SO(4)(2-), 81% for Ca(2+), and 94% for Mg(2+), respectively. With increasing ion concentration, the removal efficiencies of Ca(2+) and Mg(2+) decreased, while that of SO(4)(2-) increased slightly. Higher operating pressure significantly enhanced both ion removal and membrane flux, which was mainly attributed to the synergistic effects of Donnan electrostatic exclusion, membrane surface adsorption, and mass transfer resistance. When applied to treat real produced water from the No. 1 Oil Production Plant, the membrane achieved 100% removal of SO(4)(2-), and 91% and 95% removal of Ca(2+) and Mg(2+), respectively. The scaling tendency of the treated effluent was completely eliminated. This work provides theoretical and technical support for the engineering application of nanofiltration technology in oilfield wastewater treatment.