Abstract
The flow behaviour of aluminium alloy AA5083 at 450 [Formula: see text]C has been investigated under quasi-static loading conditions with and without a superimposed oscillating load. Samples were placed under tensile load at constant strain rates ranging from 0.001 to 0.3 s[Formula: see text]. A fixture was designed to generate the required sine-wave oscillation and was attached to the MTS tensile test machine along with a secondary, highly sensitive load cell. The frequencies of the imposed oscillations ranged from 5 to 100 Hz with an amplitude ranging from 0.02 to 0.5-N. It was observed that the imposition of oscillations influences the deformation behaviour of the material. Although the yield and tensile strength remain relatively constant, the total elongation is 8-23% higher under an imposed oscillating load. In addition, the thickness distribution profiles along the gauge length of the tensile specimens were investigated and it was observed that in the presence of oscillations the thickness distribution is more uniform. It was concluded that the presence of a superimposed oscillative load will result in greater deformation capabilities before fracture and postpone the occurrence of damage compared to conventional forming. This phenomenon was further explored utilising a user-defined material subroutine developed for the finite element solver LS-DYNA to simulate the conducted constant load tensile tests.