Abstract
INTRODUCTION: The intra-oral skeletally anchored maxillary protraction (I-SAMP) has been found to be an effective treatment for skeletal Class III malocclusion. OBJECTIVE: This in-silico study explored the influence of different force directions of intra-oral skeletally anchored Class III elastics on the changes in craniomaxillofacial complex, using finite element analysis. METHODS: A 3-dimensional (3D) finite element model of the craniomaxillofacial bones including circummaxillary sutures was constructed with high biological resemblance. A 3D assembly of four miniplates was designed and fixed on the maxilla and mandible of the finite element model. The model was applied with 250g/force at the miniplates at three angulations (10°, 20°, and 30°) from the occlusal plane, to measure stress and displacement by using the ANSYS software. RESULTS: The zygomaticotemporal, zygomaticomaxillary, and sphenozygomatic sutures played significant roles in the forward displacement and counterclockwise rotation of maxilla and zygoma, irrespective of the angulation of load application. The displacements and rotations of the zygomatico-maxillary complex decreased gradually with an increase in the angle of load application between miniplates from 10° to 30°. The mandible showed negligible displacement, with clockwise rotation. CONCLUSIONS: The treatment effects of I-SAMP were corroborated, with insight of displacement patterns and sutures involved, which were lacking in the previously conducted 2D and 3D imaging studies. The prescribed angulation of skeletally anchored Class III elastics should be as low as possible, since the displacement of zygomatico-maxillary complex increases with the decrease in angulation of the elastics.