Abstract
In this study, Pb-Co powder-pressed alloy was fabricated and used as a suitable anode material to replace Pb-Ca-Sn alloy in electrowinning. The Pb-Co anodes and the traditional Pb-Ca-Sn alloy on the electrochemical properties are investigated in a 160 g L(-1) H(2)SO(4) solution at 35 °C using galvanostatic polarization, electrochemical impedance spectroscopy and Tafel test. Thereafter, the anodic oxide layer is observed by energy dispersive X-ray spectroscopy along with scanning electron microscopy and X-ray diffractometry. The results show that the potential and oxygen evolution over-potential of the anodes exhibit a declining trend with increasing the fraction of Co. The anode potential of the Pb-2 wt% Co is approximately 170 mV lower than that of Pb-Ca-Sn alloy and reaches a stable value of 1.291 V at 35 °C, which shows good electrocatalytic performance and commercial application prospect.