Abstract
The contact between a rigid flat and a coated asperity is studied using the finite element method. The substrate is assumed as the power-law hardening elastic⁻plastic material. The effect of the hardening exponent of the substrate (n) on the contact behaviors including contact load, area, coating thickness variation and stress in the coating, is investigated. It shows larger hardening exponent results in larger contact loads and larger maximum stresses in the coating at a given interference, and leads to smaller contact area at a specific contact load. The coating thickness becomes smaller monotonically as the interference increases for larger hardening exponents, while it recovers gradually after reaching the minimum value for the smaller n cases. This work will give some universal guidance to improve the contact performance for coatings by adjusting the hardening exponent of the substrate and by optimizing the coatings parameters.