Abstract
The growing application of additive technologies in various industrial fields determines the undertaking of research in this direction. The need to study mechanical properties, including rheological properties, is necessitated by the use of additively manufactured models as utility models. Furthermore, the values of mechanical properties are affected by the technological parameters of 3D printing. One of the popular engineering materials used in 3D printing is acrylonitrile butadiene and styrene, commonly known by the abbreviated name ABS, which is quite hard and resistant to high temperatures. This article presents a study of the rheological properties of ABS material using multiparameter ideal body models. Two rheological phenomena of stress relaxation and creep were evaluated. The effects of two technological parameters, layer height and printing direction, on the resulting values of elastic moduli and dynamic viscosity coefficients were also evaluated. The elastic moduli and dynamic viscosity coefficients were calculated using the Maxwell-Wiechert and Kelvin-Voight models. The study showed the effect of layer height on rheological properties. Moreover, very good fit was obtained between the multiparameter rheological models and the experimental curves, which are shown by the average value of χ2¯ = 0.001 and R2¯ = 0.9991. The presented research can be used by designers to design machine parts or car or aircraft components. Moreover, research expands knowledge of the mechanical properties of additively manufactured parts.