Abstract
Diatomite's most common application is its use as a sorbent for petroleum substances. Since paraffin is a petroleum derivative, this paper investigates the sorption capacity of diatomite to absorb it. In this paper, the physical and chemical properties were studied for 4 different fractions of diatomite (0-0.063 mm; 0-2 mm; 0.5-3 mm; and 2-5 mm) in the crude and calcined states, and the sorption capacity of diatomite earth for absorbing paraffinic phase-change substances was determined. The physical and chemical studies of the material included conducting an oxide chemical composition analysis using XRF, examining the composition of the mineral phases using X-ray diffraction, and determining the particle size, porosity, and thermal conductivity of the diatomite. Morphology images were also taken for all 8 diatomite variants using scanning electron microscopy. Each fraction was subjected to static calcination at 850 °C for 24 h. The results showed that the calcination of the diatomite increased the porosity of the material and reduced the thermal conductivity coefficient, and most importantly, the sorption capacity to absorb paraffins. The highest sorption capacity was characterized by calcined diatomite powder, that is, diatomite with the smallest particle size. Absorption of paraffinic substances by diatomite exceeding 200 wt.% is possible. Thus, diatomite is one of the feasible candidates for an economical and lightweight building material for making PCM composites for thermal energy storage in buildings.