Abstract
During laundering, synthetic textiles (polyester, polyamide, etc.) can release small fiber debris with a length of <5 mm. These are a type of microplastics (MPs), usually referred to as microfibers (MFs), which are considered high-concern pollutants due to their continuous and cumulative entrance into the environment. Currently, as far as we know, there are no feasible alternatives to remove them. In this work, four new and sustainable filtering systems are proposed to retain the MFs emitted from domestic washing machines. The filters contain a replaceable cartridge partially filled with recycled low-density polyethylene pellets. The four designed filtering systems of different sizes were tested in a household washing machine determining the retention efficiency of the MFs after several washing cycles. It was found that all four assessed filter arrangements have a good performance for retaining MFs from the washers' effluents. Filter F1 (diameter of 4 cm and a height of 30 cm) started retaining more than 50% of the MFs, at the 10th washing cycle, the retention climbed to 66%, while in the 20th washing cycle, its retention was greater than 80%. MFs retention was higher for filter F2 (diameter of 6.3 cm and a height of 41 cm), achieving a performance greater than 90% in the 20th washing cycle. Filter F3 was arranged by turning the F1 model flow upside down and the retention efficiency is higher compared with filter F1 values, reaching a retention efficiency of almost 100% in the 15th washing cycle. Finally, filter F4 arrangement was developed using the existing washing machine filter, obtaining better performance than the F1 and F2 filters, reaching efficiencies higher than 90% at the 20th washing cycle. In summary, depending on the arrangement, the microfiber retention efficiency was estimated between 52% and 86% in the 1st washing cycle and up to 83% to 99% in the 20th. Additionally, all arrangements demonstrated that the cartridges may last for more than 30 washing cycles before needing to be replaced.