Abstract
In this paper, spark plasma sintering was used to obtain and investigate (Pb(0.97)Ba(0.03))(Zr(0.98)Ti(0.02))(1-x)Sn(x)O(3) (PBZTS) ceramic materials for x = 0, 0.02, 0.04, 0.06, and 0.08. Crystal structure, microstructure, dielectric and ferroelectric properties, and electrical conductivity tests of a series of samples were carried out. The SPS sintering method ensures favorable dielectric and ferroelectric properties of PBZTS ceramic materials. X-ray studies have shown that the material has a perovskite structure. The samples have a densely packed material structure with properly crystallized grains. The fine-grained microstructure of the PZBZTS material with high grain homogeneity allows the application of higher electric fields. Ceramic samples obtained by the SPS method have higher density values than samples obtained by the classical method (FS). The permittivity at room temperature is in the range of 245-282, while at the phase transition temperature is in the range of 10,259-12,221. At room temperature, dielectric loss factor values range from 0.006 to 0.036. The hysteresis loops of PBZTS ceramics have a shape typical for ferroelectric hard materials, and the remnant polarization values range from 0.32 to 0.39 µC/cm(2). The activation energy E(a) values of the PBZTS samples result mainly from the presence of oxygen vacancies. The PZT material doped with Ba and Sn and sintered via the SPS method has favorable physical parameters for applications in modern devices such as actuators or pulse capacitors.