Abstract
The reinforcing fibers in filament winding fiber-reinforced polymer (FFRP) are not arranged in the axial direction; thus, the members are vulnerable to bending and shear stresses. To address the limitations, this study evaluated FRP-concrete composite piles with reinforcing fiber arranged in circumferential directions. In particular, modular pultruded FRP (PFRP) members were fabricated with reinforcing fibers arranged in the axial and circumferential directions. The exterior of the fabricated PFRP members was reinforced with FFRP, and the flexural performance of these members was investigated through flexural strength tests. The results obtained from the flexural tests and flexural-stiffness prediction formula differed by approximately 0.72-1.36 times. A comparison between the results of the flexural test and flexural-strength prediction equation showed an error of approximately 1 to 10%.