Novel optical optode for selective detection and removal of ultra-trace level of mercury ions in different environmental real samples

一种新型光学光电极,用于选择性检测和去除不同环境实际样品中的痕量汞离子。

阅读:1

Abstract

Owing to the high cost and unavailability of different analytical techniques, there is an urgent need to develop new techniques not only for detecting but also removing mercury ions in real samples. Thus, an optical chemical sensor based on the anchoring of phenanthraquinone monophenylthiosemicarbazone in a plasticized cellulose triacetate membrane was fabricated and applied to the recognition and removal of mercury ions from aqueous solutions. The synthesized optode was characterized by FT-IR, SEM, AFM, and thermal analysis. Several parameters, including the pH, temperature, contact time, washing solvent, and washing time, were optimized. Under optimal conditions, a promising optode film platform was utilized for sensing mercury ions, and the concentrations were calculated based on colorimetric analysis (Histogram, RGB) of digital images, visualization, and spectrophotometry. Also, an optical optode was used for complete adsorption of mercury ions from aqueous solutions. In addition, the regeneration of the synthesized optode was evaluated using 0.1 mol L(- 1) nitric acid, which effectively removed all adsorbed mercury ions. The obtained data indicated good linearity in the sensing and adsorption of Hg(2+) over a concentration range of 0.005-5000 µgL(- 1) with a low limit of detection (LOD = 0.066 µgL(- 1)) and limit of quantification (LOQ, 0.22 µgL(- 1)). Furthermore, it showed good distinctions in the presence of coexisting ions, high stability (five months), good applicability, and reproducibility (RSD = 1.31%), making it a promising sensor for Hg(2+) detection. On the other hand, the kinetic studies revealed that the pseudo-second-order was the best model for describing the adsorption behavior of mercury ions on the optode surface. Also, the thermodynamic parameters indicate spontaneous (ΔG(0) < 0) and endothermic (ΔH(0) < 0) reactions. Also, the maximum adsorption capacity was found to be 73.2 mg g(- 1). Thus, the optodes were successfully applied for the detection and/or removal of Hg(2+) in different real samples, including cucumber, fish, soil, and water samples, with excellent recoveries of 98.1-99.5%.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。