Abstract
Low friction and high wear resistance are critical properties for sliding bearings. In this research, advanced Cu/GO nanocomposite coatings have been developed by a brush plating method to improve the tribological performance of brass-based sliding bearings. A series of brush plating studies under voltages from 2 to 6 V with different GO concentrations (0.2-0.8 g/L) was conducted, and the coating microstructures were characterised by SEM, EDX, GDOES and XRD and the tribological behaviour of the Cu/GO composite coatings were evaluated using dry ball-on-plane tribological tests The experimental results have demonstrated that GO can be successfully introduced into the whole composite coating layer; the Cu/GO composite coatings can reduce the friction of brass and increase its wear resistance by two orders of magnitude, mainly due to the self-lubricating GO added into the coatings.