Abstract
Thermal conductivity (TC) and thermal stability are the basic requirements and highly desirable properties in thermal management, heat storage and heat transfer applications. This work is regarding the fabrication of polystyrene/boron nitride composites and melt extruded to produce good thermal stability, increased thermal conductivity and enhanced mechanical properties. Our strategy is potentially applicable to produce thermally conductive composites of low cost over large scale. Boron nitride powder is bath sonicated in 10% NH3 solution to avoid its agglomeration and tendency toward entanglement in a polymer matrix. An approximately 67.43% increase in thermal conductivity and 69.37% increase in tensile strength as well as 56 multiple increases in thermal stability of the optimum samples were achieved. The developed polymeric composites are potentially applicable in the electronic industry, especially in electronic devices used for 5G, heat sink and several other aviation applications.