Abstract
Calcium sulfoaluminate (CSA) cements are a promising alternative to Portland clinker, however, a thorough understanding of their properties is needed for their broader use in the industry. One of the topics that requires a good understanding is the effect of the w/c ratio on the properties of CSA cements. To this end, the aim of this paper was to provide research into the effects of a w/c ratio in the range of 0.45-0.6 on the properties of fresh and hardened CSA pastes and mortars. For fresh mortars, consistency and setting time, as well as plastic shrinkage tests, were conducted, and were complemented by hydration heat tests, carried out on pastes. For hardened mortars, tests of compressive and flexural strength and dry shrinkage, as well as SEM photography, were conducted. It was found that, regardless of a higher hydration rate, the increase in w/c ratio decreased flexural and compressive strength, as well as shrinkage, while increasing consistency, setting time, and hydration heat. Also observed was a significant decrease in strength between 3 and 7 days of curing in mortars with a high w/c ratio. It can be concluded that, regardless of the hydration rate, low w/c ratios in CSA mortars provide better properties than high w/c ratios.