Abstract
Identification of changes occurring on the working surface of lubricated gears using analytical equipment, e.g., an FE-SEM scanning electron microscope with an EDS microanalyzer, a WLI interferometric microscope, or a GDEOS optical discharge spectrometer, enables the characterisation of wear mechanisms of this surface. Definition of the phenomena occurring on the surface of tribo-couples after scuffing tests enables a comparative analysis of scuffing resistance and surface properties of the micro- and nanostructure, and elemental composition of the tested gears. Recognition and analysis of the wear mechanisms occurring on the working surface of gears will reduce the risk of damage and losses resulting from the need for maintenance and repair. The study concerned the working surfaces of gears made of 17HNM and 35HGSA steels on which a W-DLC/CrN coating was deposited. Shell Omala S4 GX 320 commercial industrial oil with a synthetic PAO (polyalphaolefin) base was selected for the lubrication of the gears. Tribological tests employed an FZG gear scuffing under severe conditions test method and they were carried out on a T-12U test rig for cylindrical gear analysis.