Abstract
Biopolymeric films derived from starch are gaining attention due to their potential applications, which are primarily attributed to their availability and biodegradability. Here, we report developing and characterizing a biopolymeric film utilizing banana peel waste (BM2). Analytical techniques were employed, including water absorption analysis, determination of soluble matter, UV-visible absorption spectrophotometry, tensile strength assessment, morphological examination using scanning electron microscopy (SEM), and thermal analysis through thermogravimetric analysis (TGA). The water absorption analysis revealed a noteworthy absorption percentage of 115.23% and 61.75% of soluble matter. The UV-visible absorption spectrophotometry results demonstrated a light absorbance degree ranging from 0.9 to 720 nm, particularly between 400 and 1000 nm. However, the mechanical strength tests indicated relatively low resistance at 0.8 MPa, attributed to the irregular surface observed in the film's morphology as evidenced by scanning electron microscopy (SEM). Thermal analysis conducted via TGA offered valuable insights into the degradation behavior of the film. The findings reveal a degradation temperature ranging from 160 to 300 °C, thereby elucidating the thermal stability of the film and its potential applications. While mechanical limitations were evident, the biopolymeric film derived from banana peel waste demonstrated noteworthy water absorption properties, presenting potential in specific applications, particularly those that do not necessitate elevated mechanical strength. Continued efforts in optimizing and refining the film's structure promise to bolster its mechanical properties, making it suitable for various applications.