Abstract
Structural superlubricity (SSL) is a state of contact with no wear and ultralow friction. SSL has been characterized at contact with van der Waals (vdW) layered materials, while its stability under extreme loading conditions has not been assessed. By designing both self-mated and non-self-mated vdW contacts with materials chosen for their high strengths, we report outstanding robustness of SSL under very high pressures in experiments. The incommensurate self-mated vdW contact between graphite interfaces can maintain the state of SSL under a pressure no lower than 9.45 GPa, and the non-self-mated vdW contact between a tungsten tip and graphite substrate remains stable up to 3.74 GPa. Beyond this critical pressure, wear is activated, signaling the breakdown of vdW contacts and SSL. This unexpectedly strong pressure-resistance and wear-free feature of SSL breaks down the picture of progressive wear. Atomistic simulations show that lattice destruction at the vdW contact by pressure-assisted bonding triggers wear through shear-induced tearing of the single-atomic layers. The correlation between the breakdown pressure and material properties shows that the bulk modulus and the first ionization energy are the most relevant factors, indicating the combined structural and electronic effects. Impressively, the breakdown pressures defined by the SSL interface could even exceed the strength of materials in contact, demonstrating the robustness of SSL. These findings offer a fundamental understanding of wear at the vdW contacts and guide the design of SSL-enabled applications.