Abstract
Modern SiC-based materials are of paramount importance in that they serve as wear-resistant and thermal protectors and as next-generation single-photon sources for photonic and quantum solutions. Efforts are underway to identify more efficient methods of manufacturing SiC-based ceramic materials. The objective of this paper is to provide a description of the optimization of sintering SiC-TiC composites by the electroconsolidation method. The influence of titanium carbide content on the physical and mechanical properties of SiC-TiC composites obtained by spark plasma sintering (SPS) at a pressure of 45 MPa was studied. It was found that compared to sintered silicon carbide, the porosity of composites with 40 mol% TiC decreased from ~30% to 0%, the crack resistance increased from 2.9 to 6.1 MPa × m(0.5), and the hardness increased from 2.9 to 21.5 GPa. The influence of sintering temperature and holding time on SiC-TiC composites' physical and mechanical properties during sintering at a pressure of 45 MP was also investigated. An increase in temperature from 1900 °C to 2000 °C resulted in an approximately 30% rise in the composite hardness. An extension of the time allotted for the sintering process from 30 to 45 min resulted in a decrease in both the fracture toughness and hardness of the material. The utilization of two- and three-dimensional vector spaces of material features was proposed as a novel methodology for the description of manufacturing process optimization.