Abstract
A novel approach was developed to accelerate the start-up of a 20-L UASB reactor under mesophilic conditions. Two runs were conducted, where the first run (Run I) was inoculated with anaerobic sludge, and the second run (Run II) was inoculated with the same sludge supplemented with enriched electro-active biofilms collected from the working and counter electrodes of anodic and cathodic bio-electrochemical systems (BESs). Reactors' performance and microbial dynamics were monitored over 41 days. Methane production in Run II exceeded 200 mL-CH(4)/g-COD within 10 days, compared to 29 days in Run I. Run II achieved 80 % removal of soluble COD after 13 days as compared to 23 days in Run I. Sludge washout in Run II stabilized after 3 days, achieving 70 % VSS removal, whereas Run I required 17 days. Greater extracellular polymeric substance (EPS) values and higher protein-to-polysaccharide ratios in Run II may indicate accelerated granules formation mediated by EPS. 16S rRNA gene sequencing analysis results revealed shared genera between both runs but different relative abundances. Methanothrix dominated in Run I, while other archaeal genera, mainly Methanosarcina and Methanobacterium increased in abundance in the Run II. The Enterobacteriaceae family was prevalent in both reactors, with three genera, Citrobacter, Klebsiella, and Enterobacter distinctly dominating at different time points, suggesting potential links with the initial seed sludge or enriched biofilm consortia. The addition of electrochemically grown biofilm in Run II likely enhanced the microbial diversity, contributed to the rapid development of granular syntrophic communities, and improved reactor performance.