Abstract
Patch clamp is a technique that can measure weak current in the level of picoampere (pA). It has been widely used for cellular electrophysiological recording in fundamental medical researches, such as membrane potential and ion channel currents recording, etc. In order to obtain accurate measurement results, both the resistance and capacitance of the pipette are required to be compensated. Capacitance compensations are composed of slow and fast capacitance compensation. The slow compensation is determined by the lipid bilayer of cell membrane, and its magnitude usually ranges from a few picofarads (pF) to a few microfarads (μF), depending on the cell size. The fast capacitance is formed by the distributed capacitance of the glass pipette, wires and solution, mostly ranging in a few picofarads. After the pipette sucks the cells in the solution, the positions of the glass pipette and wire have been determined, and only taking once compensation for slow and fast capacitance will meet the recording requirements. However, when the study needs to deal with the temperature characteristics, it is still necessary to make a recognition on the temperature characteristic of the capacitance. We found that the time constant of fast capacitance discharge changed with increasing temperature of bath solution when we studied the photothermal effect on cell membrane by patch clamp. Based on this phenomenon, we proposed an equivalent circuit to calculate the temperature-dependent parameters. Experimental results showed that the fast capacitance increased in a positive rate of 0.04 pF/℃, while the pipette resistance decreased. The fine data analysis demonstrated that the temperature rises of bath solution determined the kinetics of the fast capacitance mainly by changing the inner solution resistance of the glass pipette. This result will provide a good reference for the fine temperature characteristic study related to cellular electrophysiology based on patch clamp technique.