Abstract
Natural-based and synthetic tissue adhesives have attracted extensive attention in the last two decades for their ability to stabilize uncontrolled bleeding instances. However; these materials present several drawbacks during use that scientists have tried to minimize in order to optimize their usage. This study comprises the development of a novel wound dressing, combining the excellent properties of polylactic acid (PLA) non-woven textile, as substrate, obtained through electrospinning, and a cyanoacrylate-based (CA) tissue adhesive, for rapid hemostatic action. Thus, the fabrication of electrospun PLA membranes at three different PLA concentrations, the design and manufacturing of the support system and the production of surgical patches were carried out. SEM and FT-IR methods were employed for analyzing the morphology as well as the indicative markers for the shelf life evolution of the obtained patches. PLA fibers with well-defined structures and a mean diameter varying between 4.6 and 7.24 μm were obtained with the increase of the concentration of the PLA solutions. In vivo tests on a rat model as well as peeling tests for good patch adhesion on liver fragments harvested from the test animals, with a limit for the strength of the liver tissue of 1.5 N, were carried out. The devices exhibited excellent adhesion to the parenchymal tissue and a long enough shelf life to be used with success in surgical procedures, also facilitating prompt hemostatic action.