Microwave-assisted synthesis of SnO₂ nanorods for oxygen gas sensing at room temperature

微波辅助合成 SnO₂ 纳米棒用于室温氧气传感

阅读:5
作者:Ameer Azam, Sami S Habib, Numan A Salah, Faheem Ahmed

Abstract

High-quality single-crystalline SnO&sub2; nanorods were synthesized using a microwave-assisted solution method. The nanorods were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), ultraviolet-visible and Raman spectroscopy, Brunauer-Emmett-Teller (BET), and electrical resistance measurements. The XRD pattern indicated the formation of single-phase SnO&sub2; nanorods with rutile structure. FE-SEM and TEM images revealed tetragonal nanorods of about 450-500 nm in length and 60-80 nm in diameter. The nanorods showed a higher BET surface area of 288 m²/g, much higher than that of previously reported work. The Raman scattering spectra indicated a typical rutile phase of the SnO&sub2;. The absorption spectrum showed an absorption peak centered at 340 nm, and the band-gap value was found to be 3.64 eV. The gas-sensing properties of the SnO&sub2; nanorods for oxygen gas with different concentrations were measured at room temperature. It was found that the value of resistance increased with the increase in oxygen gas concentration in the test chamber. The SnO&sub2; nanorods exhibited high sensitivity and rapid response-recovery characteristics to oxygen gas, and could detect oxygen concentration as low as 1, 3, 5, and 10 ppm.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。