Abstract
This research investigates the manufacturing and characterisation of polyester-based composites reinforced with jute fibres and red mud particulates. The motivation stems from the need for sustainable, high-performance materials for applications in industries, like aerospace and automotive, where resistance to erosion is critical. Jute, a renewable fibre, combined with red mud, an industrial byproduct, offers an eco-friendly alternative to conventional composites. The composites were fabricated using compression moulding with varying red mud contents (10, 20, and 30 wt.%) and a fixed 40 wt.% of jute fibre. Fibre treatments included sodium hydroxide (NaOH) and silane treatments to improve bonding and performance. Erosion tests were performed using an air-jet erosion tester, examining the effects of the red mud content, fibre treatment, and impact angles. Scanning Electron Microscope (SEM) analysis provided insights into the erosion mechanisms. A distinctive reduction in erosion rates at higher impact angles (30°-60°) was observed, attributed to the semi-ductile nature of the composites. The addition of red mud enhanced erosion resistance, although an excess of 30 wt.% reduced resistance due to poor surface bonding. Silane-treated composites showed the lowest erosion rates. This study provides new insights into the interplay among material composition, fibre treatment, and erosion dynamics, contributing to the development of optimised, eco-friendly composite materials.