Abstract
Vitamin D3 is available in oral and injectable dosage forms. Interest in the transdermal route as an alternative to the oral and parenteral routes has grown recently. In this study, several film-forming solutions for the transdermal delivery of vitamin D3 were prepared. They contained 6000 IU/mL of vitamin D3 that formed a dry and acceptable film in less than 5 min after application. The formulations consisted of ethanol and acetone 80:20, and one or more of the following ingredients: Eudragit L100-55, PVP, PG, limonene, oleic acid, camphor, and menthol. Vitamin D3 release was studied from both the film-forming solution and pre-dried films using a Franz diffusion cell. The film-forming solution released a significant amount of vitamin D3 compared to the dry film, which is attributed mostly to the saturation driving force due to the evaporation of volatile solvents. In vitro permeation studies through artificial skin Strat M® membrane revealed that the cumulative amount of vitamin D3 permeated after 24 h under the experimental conditions was around 800 IU across 3.14 cm2. The cumulative permeation curve showed faster permeation in earlier stages. Young's modulus, viscosity, and pH of the formulations were determined. Most of the formulations were stable for 3 weeks.