Abstract
A technique for colloidal forming of Ca2P2O7 macroporous bioceramics, based on low-pressure injection molding (LPIM) of a glycerol-water slip containing Ca2P2O7 and Ca(Н2PO4)2 into a plastic mold fabricated via FDM 3D-printing, was proposed. Chemical reaction between the solid phases of the water containing slip - Ca2P2O7 and Ca(Н2PO4)2, resulting in brushite (CaHPO4·2H2O) formation, led to consolidation of the casting and preserved its complex architecture in the course of mold burning-out. Macroporous ceramics of Kelvin structure (70% macropores with the sizes from 2 up to 4 mm), based on a pre-defined composition with 10 wt% Ca(PO3)2 and sintered in liquid-phase regime, demonstrated a compressive strength of 1.4 ± 0.1 MPa at a density of 22 ± 2%. In vitro tests on bioactivity in SBF solution, as well as on resorption of the ceramics in model solution of citric acid, were carried out.