日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Comparative Evaluation of Conventional and Digital Workflow Impressions for Implant-Supported Restorations

种植体支持修复中传统印模与数字化印模工作流程的比较评价

期刊:Dentistry Journal
影响因子:3.1
doi:10.3390/dj14020120
Abad-Coronel, Cristian; Ruiz, David; Quelal, Miguel Ángel; Estrada, Diana; Mena Córdova, Nancy; Aliaga, Paulina
发表日期：2026
文献求助 收藏

Evaluating a Novel 3D-Printed Resin for Dental Restorations: Fracture Resistance of Restorations Fabricated by Digital Press Stereolithography

评估一种新型3D打印树脂在牙科修复中的应用：数字压印立体光刻技术制备的修复体的抗断裂性能

期刊:Polymers
影响因子:4.9
doi:10.3390/polym17172322
Abad-Coronel, Cristian; Freire Bonilla, Cinthya; Vidal, Sebastián; Rosero, Fabián; Encalada Abad, Carolina; Mena Córdova, Nancy; Paltán, César A; Fajardo, Jorge I; Aliaga, Paulina
3D/类器官
发表日期：2025
文献求助 收藏

Flexural Strength, Fatigue Behavior, and Microhardness of Three-Dimensional (3D)-Printed Resin Material for Indirect Restorations: A Systematic Review

用于间接修复的三维（3D）打印树脂材料的弯曲强度、疲劳性能和显微硬度：系统评价

期刊:Materials
影响因子:3.2
doi:10.3390/ma18030556
Abad-Coronel, Cristian; Durán Urdiales, Daniela; Benalcázar Arias, María Verónica; Córdova, Andrea Karina; Medina, María Sol; Bravo Torres, Wilson
3D/类器官
发表日期：2025
文献求助 收藏

The Use of a Digitally Generated Matrix for Consistent Shade Recording in Tooth Bleaching-A Case Report

使用数字化生成矩阵进行牙齿漂白中一致比色记录——病例报告

期刊:Dentistry Journal
影响因子:3.1
doi:10.3390/dj13080339
Abad-Coronel, Cristian; Vallejo-Yupa, Guissell; Aliaga, Paulina; Mena-Córdova, Nancy; Alonso Pérez-Barquero, Jorge; Amengual-Lorenzo, José
发表日期：2025
文献求助 收藏

Novelty of digital press stereolithography (DPS) with MIDAS system in crown fabrication: marginal and internal fit evaluation

MIDAS系统在牙冠制作中应用数字压印立体光刻（DPS）技术的创新之处：边缘和内部密合度评估

期刊:BMC Oral Health
影响因子:3.1
doi:10.1186/s12903-025-06818-1
Abad-Coronel, Cristian; Martín Proaño, S; Michelle González, S; Jerely Chico, L; Mena Córdova, Nancy; Rosero, Fabián; Aliaga, Paulina
发表日期：2025
文献求助 收藏

Assessment of the intercanine gingival zenith (or CEJ) distance as a method for determining occlusal vertical dimension (OVD): a cross-sectional observational study

以犬齿间牙龈顶点（或牙釉质牙骨质界）距离作为确定咬合垂直高度（OVD）的方法：一项横断面观察研究

期刊:BMC Research Notes
影响因子:1.7
doi:10.1186/s13104-025-07571-y
Abad-Coronel, Cristian; Portocarrero Miranda, Mariam; Malla Bernal, Kelly
发表日期：2025
文献求助 收藏

Fracture Resistance Comparative Analysis of Milled-Derived vs. 3D-Printed CAD/CAM Materials for Single-Unit Restorations

单颗修复体中铣削成型材料与3D打印CAD/CAM材料的抗断裂性能对比分析

期刊:Polymers
影响因子:4.9
doi:10.3390/polym15183773
Abad-Coronel, Cristian; Bravo, Manuel; Tello, Salomé; Cornejo, Emilia; Paredes, Yirelly; Paltan, Cesar A; Fajardo, Jorge I
3D/类器官
发表日期：2023
文献求助 收藏

Fracture Resistance Analysis of CAD/CAM Interim Fixed Prosthodontic Materials: PMMA, Graphene, Acetal Resin and Polysulfone

CAD/CAM临时固定修复材料的抗折强度分析：PMMA、石墨烯、缩醛树脂和聚砜

期刊:Polymers
影响因子:4.9
doi:10.3390/polym15071761
Abad-Coronel, Cristian; Calle, Carolina; Abril, Gabriela; Paltán, César A; Fajardo, Jorge I
多发性骨髓瘤
发表日期：2023
文献求助 收藏

Comparative Analysis between Conventional Acrylic, CAD/CAM Milled, and 3D CAD/CAM Printed Occlusal Splints

传统丙烯酸树脂咬合夹板、CAD/CAM铣削咬合夹板和3D CAD/CAM打印咬合夹板的比较分析

期刊:Materials
影响因子:3.2
doi:10.3390/ma16186269
Abad-Coronel, Cristian; Ruano Espinosa, Carolina; Ordóñez Palacios, Sofía; Paltán, César A; Fajardo, Jorge I
3D/类器官
发表日期：2023
文献求助 收藏

Comparative Analysis between 3D-Printed Models Designed with Generic and Dental-Specific Software

使用通用软件和牙科专用软件设计的3D打印模型的比较分析

期刊:Dentistry Journal
影响因子:3.1
doi:10.3390/dj11090216
Abad-Coronel, Cristian; Pazán, Doménica Patricia; Hidalgo, Lorena; Larriva Loyola, Jaime
3D/类器官
发表日期：2023
文献求助 收藏