Calignano Flaviana相关文献与解析，生知库

A Comparison Between the Residual Stresses of Ti6Al4V and Ti-6Al-2Sn-4Zr-6Mo Processed by Laser Powder Bed Fusion.

激光粉末床熔融法制备的Ti6Al4V和Ti-6Al-2Sn-4Zr-6Mo残余应力的比较

Aversa Alberta, Carrozza Alessandro, Mercurio Vincenza, Calignano Flaviana, Sereda Olha, Pejchal Vaclav, Lombardi Mariangela

其它

发表日期：2025

文献求助收藏

Texture and Microstructural Features at Different Length Scales in Inconel 718 Produced by Selective Laser Melting

选择性激光熔化法制备的Inconel 718合金在不同长度尺度下的纹理和微观结构特征

期刊:Materials

影响因子:3.2

doi:10.3390/ma12081293

Calandri, Michele; Yin, Shuo; Aldwell, Barry; Calignano, Flaviana; Lupoi, Rocco; Ugues, Daniele

发表日期：2019

文献求助收藏

Influence of Process Parameters on the Porosity, Accuracy, Roughness, and Support Structures of Hastelloy X Produced by Laser Powder Bed Fusion

工艺参数对激光粉末床熔融法制备的哈氏合金X的孔隙率、精度、粗糙度和支撑结构的影响

期刊:Materials

影响因子:3.2

doi:10.3390/ma12193178

Calignano, Flaviana; Minetola, Paolo

发表日期：2019

文献求助收藏

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties

AlSi10Mg合金选择性激光熔化（SLM）工艺、微观结构和力学性能研究

期刊:Materials

影响因子:3.2

doi:10.3390/ma10010076

Trevisan, Francesco; Calignano, Flaviana; Lorusso, Massimo; Pakkanen, Jukka; Aversa, Alberta; Ambrosio, Elisa Paola; Lombardi, Mariangela; Fino, Paolo; Manfredi, Diego

发表日期：2017

文献求助收藏

In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures

在3D打印聚合物结构中原位热生成银纳米粒子

期刊:Materials

影响因子:3.2

doi:10.3390/ma9070589

Fantino, Erika; Chiappone, Annalisa; Calignano, Flaviana; Fontana, Marco; Pirri, Fabrizio; Roppolo, Ignazio

3D/类器官

发表日期：2016

文献求助收藏

Additive Manufacturing of a Microbial Fuel Cell--A detailed study

微生物燃料电池的增材制造——一项详细研究

期刊:Scientific Reports

影响因子:3.9

doi:10.1038/srep17373

Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

微生物学

发表日期：2015

文献求助收藏

Feasibility Study on Additive Manufacturing of Feed Horn Operating in D-Band

D波段进给喇叭增材制造可行性研究

A Comparison Between the Residual Stresses of Ti6Al4V and Ti-6Al-2Sn-4Zr-6Mo Processed by Laser Powder Bed Fusion.

激光粉末床熔融法制备的Ti6Al4V和Ti-6Al-2Sn-4Zr-6Mo残余应力的比较

Texture and Microstructural Features at Different Length Scales in Inconel 718 Produced by Selective Laser Melting

选择性激光熔化法制备的Inconel 718合金在不同长度尺度下的纹理和微观结构特征

Influence of Process Parameters on the Porosity, Accuracy, Roughness, and Support Structures of Hastelloy X Produced by Laser Powder Bed Fusion

工艺参数对激光粉末床熔融法制备的哈氏合金X的孔隙率、精度、粗糙度和支撑结构的影响

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties

AlSi10Mg合金选择性激光熔化（SLM）工艺、微观结构和力学性能研究

In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures

在3D打印聚合物结构中原位热生成银纳米粒子

Additive Manufacturing of a Microbial Fuel Cell--A detailed study

微生物燃料电池的增材制造——一项详细研究