日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Flexible Biobased Thermosets from Epoxidized Plant Oils: A Study of Aliphatic Cross-Linking Agents

利用环氧植物油制备柔性生物基热固性树脂：脂肪族交联剂的研究

期刊:ACS Applied Polymer Materials
影响因子:4.7
doi:10.1021/acsapm.4c03944
Janesch, Jan; Solt-Rindler, Axel; Dumschat, Lara; Vay, Oliver; Mija, Alice; Gindl-Altmutter, Wolfgang; Rosenau, Thomas; Raffeiner, Wolfgang; Hansmann, Christian
发表日期：2025
文献求助 收藏

High Glass Transition Epoxy Resins from Biobased Phloroglucinol and Unmodified Kraft Lignin

由生物基间苯三酚和未改性牛皮纸木质素制备的高玻璃化转变温度环氧树脂

期刊:ACS Omega
影响因子:4.3
doi:10.1021/acsomega.5c06542
Janesch, Jan; Dinu, Roxana; Rosenau, Thomas; Potthast, Antje; Gindl-Altmutter, Wolfgang; Grasböck, Stefan; Sulaeva, Irina; Mija, Alice
发表日期：2025
文献求助 收藏

Facile Preparation of Mechanically Robust and Functional Silica/Cellulose Nanofiber Gels Reinforced with Soluble Polysaccharides

简易制备机械强度高且功能性强的二氧化硅/纤维素纳米纤维凝胶，并用可溶性多糖增强

期刊:Nanomaterials
影响因子:
doi:10.3390/nano12060895
Marco Beaumont, Elisabeth Jahn, Andreas Mautner, Stefan Veigel, Stefan Böhmdorfer, Antje Potthast, Wolfgang Gindl-Altmutter, Thomas Rosenau
发表日期：2022
文献求助 收藏

Pore Development during the Carbonization Process of Lignin Microparticles Investigated by Small Angle X-ray Scattering

利用小角X射线散射研究木质素微粒碳化过程中的孔隙发育

期刊:Molecules
影响因子:4.6
doi:10.3390/molecules26072087
Rennhofer, Harald; Köhnke, Janea; Keckes, Jozef; Tintner, Johannes; Unterweger, Christoph; Zinn, Thomas; Deix, Karl; Lichtenegger, Helga; Gindl-Altmutter, Wolfgang
发育与干细胞
发表日期：2021
文献求助 收藏

Cure Kinetics and Inverse Analysis of Epoxy-Amine Based Adhesive Used for Fastening Systems

用于紧固系统的环氧胺基胶粘剂的固化动力学和逆向分析

期刊:Materials
影响因子:
doi:10.3390/ma14143853
Bilen Emek Abali, Michele Zecchini, Gilda Daissè, Ivana Czabany, Wolfgang Gindl-Altmutter, Roman Wan-Wendner
信号转导
发表日期：2021
文献求助 收藏

Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions

通过喷涂水性烷基烯酮二聚体分散液简便制备超疏水木材表面

期刊:RSC Advances
影响因子:4.6
doi:10.1039/c9ra03700d
Arminger, Benjamin; Gindl-Altmutter, Wolfgang; Keckes, Jozef; Hansmann, Christian
发表日期：2019
文献求助 收藏

Fine Cellulosic Materials Produced from Chemical Pulp: the Combined Effect of Morphology and Rate of Addition on Paper Properties

化学纸浆制备的精细纤维素材料：形态和添加量对纸张性能的综合影响

期刊:Nanomaterials
影响因子:4.3
doi:10.3390/nano9030321
Bossu, Julie; Eckhart, René; Czibula, Chiara; Winter, Armin; Zankel, Armin; Gindl-Altmutter, Wolfgang; Bauer, Wolfgang
发表日期：2019
文献求助 收藏

A General Aqueous Silanization Protocol to Introduce Vinyl, Mercapto or Azido Functionalities onto Cellulose Fibers and Nanocelluloses

一种将乙烯基、巯基或叠氮基官能团引入纤维素纤维和纳米纤维素的通用水相硅烷化方案

期刊:Molecules
影响因子:4.6
doi:10.3390/molecules23061427
Beaumont, Marco; Bacher, Markus; Opietnik, Martina; Gindl-Altmutter, Wolfgang; Potthast, Antje; Rosenau, Thomas
发表日期：2018
文献求助 收藏

Electrically-Conductive Sub-Micron Carbon Particles from Lignin: Elucidation of Nanostructure and Use as Filler in Cellulose Nanopapers

木质素衍生的导电亚微米碳颗粒：纳米结构解析及其在纤维素纳米纸中的填料应用

期刊:Nanomaterials
影响因子:4.3
doi:10.3390/nano8121055
Köhnke, Janea; Rennhofer, Harald; Unterweger, Christoph; Gierlinger, Notburga; Keckes, Jozef; Zollfrank, Cordt; Rojas, Orlando J; Gindl-Altmutter, Wolfgang
发表日期：2018
文献求助 收藏

Residual wood polymers facilitate compounding of microfibrillated cellulose with poly(lactic acid) for 3D printer filaments

残留的木质聚合物有助于将微纤化纤维素与聚乳酸复合，用于生产3D打印耗材。

期刊:Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences
影响因子:3.7
doi:10.1098/rsta.2017.0046
Winter, Armin; Mundigler, Norbert; Holzweber, Julian; Veigel, Stefan; Müller, Ulrich; Kovalcik, Adriana; Gindl-Altmutter, Wolfgang
3D/类器官
发表日期：2018
文献求助 收藏