日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:

In-vitro study of the implant bed cooling during guided implantation using an additively manufactured drilling template with an integrated cooling system

利用增材制造的带集成冷却系统的钻孔模板,对引导植入过程中植入床的冷却情况进行体外研究

Kopzon, Vadim; Hahnel, Sebastian; Broll, Alexander; Fuellerer, Julian; Beierlein, Georg; Rosentritt, Martin

Correction: Koenig et al. Characterisation of the Filler Fraction in CAD/CAM Resin-Based Composites. Materials 2021, 14, 1986

更正:Koenig 等人,《CAD/CAM 树脂基复合材料中填料分数的表征》,Materials 2021, 14, 1986

Koenig, Andreas; Schmidtke, Julius; Schmohl, Leonie; Schneider-Feyrer, Sibylle; Rosentritt, Martin; Hoelzig, Hieronymus; Kloess, Gert; Vejjasilpa, Ketpat; Schulz-Siegmund, Michaela; Fuchs, Florian; Hahnel, Sebastian

Clinical performance of long-term temporary fixed dental prostheses fabricated from CAD/CAM resin-based composite

采用CAD/CAM树脂基复合材料制作的长期临时固定式牙科修复体的临床性能

Dold, Florian; Mueller, Karolina; Butz, Martin; Hahnel, Sebastian

Influence of surface treatment on roughness, fracture force, flexural strength, and dynamic loading of a 3D-printed crown and bridge material

表面处理对3D打印牙冠和牙桥材料的粗糙度、断裂力、弯曲强度和动态载荷的影响

Schmidt, Michael Benno; Hahnel, Sebastian; Rauch, Angelika; Rosentritt, Martin

Polishing of 4Y- and 5Y- zirconia: effects on roughness, color and gloss.

4Y-和5Y-氧化锆的抛光:对粗糙度、颜色和光泽的影响

Koch Laura, Hahnel Sebastian, Rauch Angelika, Rosentritt Martin

Surface Pretreatment Protocols For Indirect/Semi-Direct Dental Restorations: A Cross-Sectional Survey and Expert Consensus

间接/半直接牙齿修复体表面预处理方案:横断面调查和专家共识

Mayinger, Felicitas; Lankes, Valerie; Roos, Malgorzata; Rohr, Nadja; Ioannidis, Alexis; Elsayed, Adham; Güth, Jan-Frederik; Edelhoff, Daniel; Passia, Nicole; Esmail, Iman; Beuer, Florian; Wolfart, Stefan; Spies, Benedikt Christopher; Schimmel, Martin; Abou-Ayash, Samir; Hahnel, Sebastian; Schlenz, Maximiliane Amelie; Frankenberger, Roland; Blunck, Uwe; Kraus, Dominik; Engelschalk, Marcus; Huettig, Fabian; Kern, Matthias; Luehrs, Anne-Katrin; Gierthmuehlen, Petra C; Stawarczyk, Bogna

The Influence of CLSM Magnification on the Measured Roughness of Differently Prepared Dental Materials

共聚焦激光扫描显微镜放大倍率对不同制备方法牙科材料粗糙度测量的影响

Rosentritt, Martin; Schmutzler, Anne; Hahnel, Sebastian; Kurzendorfer-Brose, Laura

Biological interaction, esthetics, handling, and loss rate of temporary luting cements - a clinical single-blind randomized controlled trial

临时粘固剂的生物学相互作用、美观性、操作性和脱落率——一项临床单盲随机对照试验

Günther, Elena; Hahnel, Sebastian; Schrock, Annett; Schierz, Oliver; Wolter, Sophia

Effect of powder air polishing and ultrasonic scaling on the marginal and internal interface (tooth-veneer) of ceramic veneers: an in vitro study

喷砂抛光和超声波洁牙对陶瓷贴面边缘和内部界面(牙-贴面)的影响:一项体外研究

Fuchs, Florian; Mayer, Laura Antonia; Unterschütz, Lena; Ziebolz, Dirk; Oberueck, Nadia; Schulz-Kornas, Ellen; Hahnel, Sebastian; Koenig, Andreas

Influence of the Application Time of Silane for the Bonding Performance between Feldspar or Lithium Disilicate Ceramics and Luting Resin Composites

硅烷施用时间对长石或二硅酸锂陶瓷与粘接树脂复合材料粘接性能的影响

Fuchs, Florian; Westerhove, Sina Maria; Schmohl, Leonie; Koenig, Andreas; Suharbiansah, Rujito Sesariojiwandono Ridho; Hahnel, Sebastian; Rauch, Angelika