日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Machine learning models for mechanical properties prediction of basalt fiber-reinforced concrete incorporating graphical user interface

用于预测玄武岩纤维增强混凝土力学性能的机器学习模型，并结合图形用户界面

期刊:Scientific Reports
影响因子:3.9
doi:10.1038/s41598-025-20304-2
Haque, Md Ehtesamul; Arifuzzaman, Md; Khan, Kaffayatullah; Azad, A K M; Alluqmani, Ayed Eid; Kashem, Abul
发表日期：2025
文献求助 收藏

Synergistic effects of rice husk ash and extracted microsilica on the performance of high-strength concrete

稻壳灰和提取的微硅粉对高强混凝土性能的协同效应

期刊:Scientific Reports
影响因子:3.9
doi:10.1038/s41598-025-25218-7
Ullah, Muhammad Fahad; Tang, Hesheng; Ullah, Arshad; Khan, Kaffayatullah
发表日期：2025
文献求助 收藏

Large rupture strain cotton ropes hybridized with affordable fiberglass chopped strand mat sheets for enhanced compressive behavior of reinforced concrete columns

将高抗拉强度棉绳与价格实惠的玻璃纤维短切毡片材混合使用，可增强钢筋混凝土柱的抗压性能。

期刊:Heliyon
影响因子:3.6
doi:10.1016/j.heliyon.2024.e39675
Saingam, Panumas; Gadagamma, Chaitanya Krishna; Hussain, Qudeer; Ejaz, Ali; Hlaing, Hnin Hnin; Suwannatrai, Rawirot; Khan, Kaffayatullah; Suparp, Suniti
发表日期：2024
文献求助 收藏

Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries

生物质衍生活性炭基负极材料的制备及其在高性能锂离子电池中的应用

期刊:Micromachines
影响因子:3
doi:10.3390/mi14010192
Ahmed, Faheem; Almutairi, Ghazzai; Hasan, Prince M Z; Rehman, Sarish; Kumar, Shalendra; Shaalan, Nagih M; Aljaafari, Abdullah; Alshoaibi, Adil; AlOtaibi, Bandar; Khan, Kaffayatullah
发表日期：2023
文献求助 收藏

Experimental and machine learning approaches to investigate the effect of waste glass powder on the flexural strength of cement mortar

采用实验和机器学习方法研究废玻璃粉对水泥砂浆抗弯强度的影响

期刊:PLoS One
影响因子:2.6
doi:10.1371/journal.pone.0280761
Amin, Muhammad Nasir; Alkadhim, Hassan Ali; Ahmad, Waqas; Khan, Kaffayatullah; Alabduljabbar, Hisham; Mohamed, Abdullah
发表日期：2023
文献求助 收藏

Low-Cost Fiber Chopped Strand Mat Composites for Compressive Stress and Strain Enhancement of Concrete Made with Brick Waste Aggregates

用于增强砖废骨料混凝土抗压应力和应变的低成本纤维短切毡复合材料

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14214714
Joyklad, Panuwat; Saingam, Panumas; Ali, Nazam; Ejaz, Ali; Hussain, Qudeer; Khan, Kaffayatullah; Chaiyasarn, Krisada
发表日期：2022
文献求助 收藏

Knowledge Mapping of the Literature on Fiber-Reinforced Geopolymers: A Scientometric Review

纤维增强地聚合物文献知识图谱：科学计量学综述

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14225008
Alkadhim, Hassan Ali; Amin, Muhammad Nasir; Ahmad, Waqas; Khan, Kaffayatullah; Al-Hashem, Mohammed Najeeb; Houda, Sara; Azab, Marc; Baki, Zaher Abdel
发表日期：2022
文献求助 收藏

Hybrid Ensemble Model for Predicting the Strength of FRP Laminates Bonded to the Concrete

用于预测FRP层压板与混凝土粘结强度的混合集成模型

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14173505
Alabdullh, Anas Abdulalem; Biswas, Rahul; Gudainiyan, Jitendra; Khan, Kaffayatullah; Bujbarah, Abdullah Hussain; Alabdulwahab, Qasem Ahmed; Amin, Muhammad Nasir; Iqbal, Mudassir
发表日期：2022
文献求助 收藏

Investigating the Bond Strength of FRP Laminates with Concrete Using LIGHT GBM and SHAPASH Analysis

利用LIGHT GBM和SHAPASH分析方法研究FRP层压板与混凝土的粘结强度

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14214717
Amin, Muhammad Nasir; Salami, Babatunde Abiodun; Zahid, Muhammad; Iqbal, Mudassir; Khan, Kaffayatullah; Abu-Arab, Abdullah Mohammad; Alabdullah, Anas Abdulalim; Jalal, Fazal E
发表日期：2022
文献求助 收藏

GEP Tree-Based Prediction Model for Interfacial Bond Strength of Externally Bonded FRP Laminates on Grooves with Concrete Prism

基于GEP树的预测模型用于预测外粘接FRP层合板在带混凝土棱柱槽上的界面粘结强度

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14102016
Amin, Muhammad Nasir; Iqbal, Mudassir; Jamal, Arshad; Ullah, Shahid; Khan, Kaffayatullah; Abu-Arab, Abdullah M; Al-Ahmad, Qasem M S; Khan, Sikandar
发表日期：2022
文献求助 收藏